PDU12

DAKSTAR Diving LED Flashlight PDU12

----- Underwater 100meters

Specifications:

LED Type: CREE XM-L U2 with 50000 hours life span

Max Output: 850LM

Reflector: High performance aluminum smooth reflector with concentrated beam shot

Lens: Toughened anti-pressure and anti-abrasion glass

Circuit: Newly designed high efficiency drive circuit for XM-L U2, can stably output drive current

Function: Max-Min

Battery: 26650*1

Working Voltage: 2.75V to 4.5V

Switch: Side Switch

Impact Resistant: 1.5m

Material: PC and aluminum alloy

Waterproof: IPX-8 standard waterproof (Underwater 100 Meter)

Dimensions: Head diameter 49mm(1.93 inches)

Body diameter 35.5mm(1.40 inches)

Total length 185mm(7.28 inches)

Weight (include battery): 276g (7.93 ounces)


Features:

●Securely sealed side switch for superior water resistance

●Extra-thick anti-pressure glass lens for diving

●Waterproof grade IPX-8,100meters diving depth

New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency and throw capability

●Specially designed for Diving, Camping, Mountaineering, Self-defense, Hunting and Outdoor sports

 

Operation:

With the battery correctly inserted, screw the tail cap onto the body fully. Press side switch to change the mode from Max-Min.

 

Output & Runtime:

Max output of 850 lumens for approximately 3 hours

Min output of 450 lumens for approximately 6 hours

Note: Stated brightness and runtime figures are based on tests using 1pc 26650 Li-ion battery (approximate 4000mAH) under laboratory conditions. Variances in these figures will occur depending on battery used and individual usage habits.

 

Notice:

●Don‘t shine the eyes straightly as the powerful light could cause a permanent injury.

●Don‘t disassemble the lamp frequently, in case of damaging the reflector or the bulb.

●Please release the batteries and keep them dry and cool when you won‘t use the flashlight for a time.
●When inserting the battery ensure the positive end points toward the LED assembly. Incorrectly inserting the battery may damage the Flashlight.
●When the battery is low, users will experience low brightness that cannot be increased via the ramping feature. The light should be turned off and inserted a new battery.