DAKSTAR Diving LED Flashlight DU32A

----- Underwater 200meters


LED Type: 3*CREE XM-L U2 with 50000 hours life span

Max Output: 2500LM

Reflector: High performance aluminum smooth reflector with concentrated beam shot

Lens: Toughened anti-pressure and anti-abrasion glass

Circuit: Newly designed high efficiency drive circuit for XM-L U2, can stably output drive current

Function: ON/OFF

Battery: 26650*2/18650*2

Working Voltage: 5.5V to 8.5V

Switch: Magnetic switch

Impact Resistant: 1.5m

Material: Aircraft grade 6061-T6 aluminum alloy

Finish: Mil. Spec. Type III hard anodized

Waterproof: IPX-8 standard waterproof (Underwater 200 Meter)

Dimensions: Head diameter 64mm(2.52 inches)

Body diameter 33mm(1.30 inches)

Total length 210mm(8.27 inches)

Weight (without battery): 508g (17.92 ounces)


●Securely sealed head rotating switch for superior water resistance

●Extra-thick anti-pressure glass lens for diving

●Waterproof grade IPX-8, 200meters diving depth

New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency and throw capability

●Accepts both 26650 and 18650 rechargeable Li-ion batteries, providing high output and long runtime

●Specially designed for Diving, Camping, Mountaineering, Self-defense, Hunting and Outdoor sports



With the battery correctly inserted, screw the tail cap onto the body fully. Rotate the head Magnet Switch to turn light ON/OFF.


Output & Runtime:

Max output of 2500 lumens for approximately 150 mins

Note: Stated brightness and runtime figures are based on tests using 2pcs 26650 Li-ion batteries (approximate 5000mAH) under laboratory conditions. Variances in these figures will occur depending on battery used and individual usage habits.


●Don‘t shine the eyes straightly as the powerful light could cause a permanent injury.

●Don‘t disassemble the lamp frequently, in case of damaging the reflector or the bulb.

●Please release the batteries and keep them dry and cool when you won‘t use the flashlight for a time.
●When inserting the battery ensure the positive end points toward the LED assembly. Incorrectly inserting the battery may damage the Flashlight.
●When the battery is low, users will experience low brightness that cannot be increased via the ramping feature. The light should be turned off and inserted a new battery.