DAKSTAR Professional Searching Flashlight SL32B

----- High Power LED Flashlight


LED Type: Three CREE XM-L2 U2 with 50000 hours life span

Max Output: 2000LM

Reflector: High performance aluminum smooth reflector with concentrated beam shot

Lens: Shatter and scratch resistant and anti-reflective coated ultra clear lens

Circuit: Newly designed high efficiency drive circuit

Function: Min-Mid-Max-Strobe

Battery: 26650*1

Working Voltage: 2.75V to 4.5V

Switch: Side mode button

Impact Resistant: 1.5m

Material: Aircraft grade 6061-T6 aluminum alloy

Finish: Mil. Spec. Type III hard anodized

Waterproof: IPX-7 standard waterproof

Dimensions: Head diameter 63.5mm (2.50 inches)

Body diameter 32mm (1.26 inches)

Total length 136mm (5.35 inches)

Weight (without battery): 275g (9.70ounces)


●Newly designed high efficiency drive circuit

●Premium three CREE XM-L LED allows the light has a maximum output of 2000 lumens

New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency and throw capability

●Specially designed for Search & Rescue, Camping, Law Enforcement, Self-defense, Hunting and Outdoorsman



Press side switch for three modes(Min-Mid-Max);Click the side switch twice quickly for strobe mode; Turn off the light by long pressing the side switch for more than one second


Output & Runtime:

Max output of 2000 lumens for approximately 1 hours

Mid output of 600 lumens for approximately 3.5 hours

Min output of 100 lumens for approximately 22 hours

Note: Stated brightness and runtime figures are based on tests using 1pc 26650 Li-ion batteries (approximate 4000mAH) under laboratory conditions. Variances in these figures will occur depending on battery used and individual usage habits.


●Don‘t shine the eyes straightly as the powerful light could cause a permanent injury.

●Don‘t disassemble the lamp frequently, in case of damaging the reflector or the bulb.

●Please release the batteries and keep them dry and cool when you won‘t use the flashlight for a time.
●When inserting the battery ensure the positive end points toward the LED assembly. Incorrectly inserting the battery may damage the Flashlight.
●When the battery is low, users will experience low brightness that cannot be increased via the ramping feature. The light should be turned off and inserted a new battery.