DAKSTAR EDC Flashlight CR15-6

----- Compact size with powerful output


LED Type: CREE XP-G R5 with 50000 hours life span

Max Output: 250LM

Reflector: High performance micro Orange Peel reflector with long effective range

Lens: Toughened ultra clear and anti-abrasion glass

Circuit: High efficient circuit with high quality

Function: Max-Min

Battery: CR123A*2/16340*2

Working Voltage: 3.2V to 8.5V

Switch: Forward-click switch

Impact Resistant: 1.5m

Material: Aircraft grade 6061-T6 aluminum alloy

Finish: Mil. Spec. Type III hard anodized

Waterproof: IPX-7 standard waterproof

Dimensions: Head diameter 22.5mm (0.89 inches)

Body diameter 22.5mm (0.89 inches)

Total length 124mm (4.88 inches)

Weight (without battery): 63g (2.22 ounces)


●Newly designed high efficiency broad voltage drive circuit

New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency and throw capability

●Constructed from Type III hard anodized T6061 aircraft grade aluminum

●Compact size with powerful output

●Specially designed for EDC, Police, Military, Reading, Hunting, Working, Camping and Outdoor activities



Press tail switch for turning light on/off

With the light off, gently press (no click) the forward tail switch, the brightness level will switch between two modes ( Max-Min) or "click" is heard will enter the mode and turn on.


Output & Runtime:

Max output of 250 lumens for approximately 1.4 hours

Min output of 60 lumens for approximately 7 hours

Note: Stated brightness and runtime figures are based on tests using 2pcs 16340 Li-ion battery under laboratory conditions. Variances in these figures will occur depending on battery used and individual usage habits.



●Don‘t shine the eyes straightly as the powerful light could cause a permanent injury.

●Don‘t disassemble the lamp frequently, in case of damaging the reflector or the bulb.

●Please release the batteries and keep them dry and cool when you won‘t use the flashlight for a time.
●When inserting the battery ensure the positive end points toward the LED assembly. Incorrectly inserting the battery may damage the Flashlight.
●When the battery is low, users will experience low brightness that cannot be increased via the ramping feature. The light should be turned off and inserted a new battery.