SL4U

 
DAKSTAR NEWEST HIGH POWER FLASHLIGHT SL4U
----- Four CREE XM-L U2 LED

 

 

Specifications:
LED Type: 4 CREE XM-LU2 with 50000 hours life span
Max Output: 4000LM
Reflector: High performance aluminum smooth reflector with concentrated beam shot
Lens: Shatter and scratch resistant and anti-reflective coated ultra clear lens
Circuit: Newly designed high efficiency drive circuit for XM-L U2 with voltage warning
Function: Min-Mid-Max-Strobe
Battery: 18650*4
Working Voltage: 2.75V to 4.5V
Switch: Side mode button
Impact Resistant: 1.5m
Material: Aircraft grade 6061-T6 aluminum alloy
Finish: Mil. Spec. Type III hard anodized
Waterproof: IPX-8 standard waterproof
Dimensions: Head diameter 64mm (2.52 inches)
Body diameter 49mm (1.93 inches)
Total height 97mm (3.82 inches)
Total length 133mm (5.24 inches)
Weight (without battery): 430g (15.2 ounces)

Features:
●Newly designed high efficiency drive circuit with power indicator system and low battery prompt:
Power≥10%,the green light in side button will be on
Power<10%, the red light in side button will be on and strobe
Cut off the power when the indicating light strobe and charge them.
●Side switch choose between 3 brightness levels and strobe mode for multi-purpose
●Premium four CREE XM-L U2 allows the light has a maximum output of 4000 lumens
●New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency and throw capability
●Specially designed for Search & Rescue, Police, Security, Camping, Law Enforcement, Self-defense, Hunting and Outdoorsman

Operation:
●Press side switch the brightness level will switch in three modes (Min, Mid, Max), Long-Press the switch more than one second will enter into Strobe mode
Output & Runtime:
●Max output of 4000 lumens for approximately 1.5 hours
●Mid output of 1800 lumens for approximately 3.3 hours
●Min output of 500 lumens for approximately 12.7 hours
Note: Stated brightness and runtime figures are based on tests using 4pcs 18650 Li-ion batteries(approximate 2600mAH) under laboratory conditions. Variances in these figures will occur depending on battery used and individual usage habits.

 


 

 

 

 

 

 

 

 

 

Notice:

●Don't shine the eyes straightly as the powerful light could cause a permanent injury.

●Don't disassemble the lamp frequently, in case of damaging the reflector or the bulb.

●Please release the batteries and keep them dry and cool when you won't use the flashlight for a time.
●When inserting the battery ensure the positive end points toward the LED assembly. Incorrectly inserting the battery may damage the Flashlight.