PU12A

 
DAKSTAR Professional Police Flashlight PU12A
----- Using Newest Design With emergency tool

 

 

Specifications:
LED Type: CREE XM-L U2 with 50000 hours life span
Max Output: 850LM
Reflector: High performance aluminum orange peel reflector with smooth beam shot
Lens: Toughened ultra clear and anti-abrasion glass with AR coating
Circuit: Microcontroller driver circuit, High efficient constant current circuit and output-luminance
Function: Max-Mid-Min
Battery: 18650*1
Working Voltage: 2.75V to 4.5V
Switch: Side Switch
Impact Resistant: 1.5m
Material: Aircraft grade 6063-T6 aluminum alloy
Finish: Mil. Spec. Type III hard anodized
Waterproof: IPX-7 standard waterproof
Dimensions: Head diameter 27mm (1.06 inches)
Body diameter 24.5mm (0.96 inches)
Total length 111mm (4.37 inches)
Weight (without battery): 95g (3.35ounces)

Features:
●Newly designed high efficiency constant current drive circuit
●Side switch for convenient operation
●New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency.
●Flicker at 3V, Cut off the power at 2.75V
●Specially designed for Sports, Police, Law Enforcement, Self-defense, Hunting, Camping and Outdoorsman
Operation:
●Press side switch more than one second for turning light on/off
●With the light on, change brightness by short pressing the side switch the brightness will be changed in Max ,Mid, Min.
Output & Runtime:
●Max output of 850 lumens for approximately 2.2 hours
●Mid output of 400 lumens for approximately 5 hours
●Min output of 100 lumens for approximately 10 hours
Note: Stated brightness and runtime figures are based on tests using 1pc 18650 Li-ion battery (approximate 2600mAH) under laboratory conditions. Variances in these figures will occur depending on battery used and individual usage habits.

  

 

 

 

 

 

 

 

 

Notice:

●Don't shine the eyes straightly as the powerful light could cause a permanent injury.

●Don't disassemble the lamp frequently, in case of damaging the reflector or the bulb.

●Please release the batteries and keep them dry and cool when you won't use the flashlight for a time.
●When inserting the battery ensure the positive end points toward the LED assembly. Incorrectly inserting the battery may damage the Flashlight.